Bianco Ciresuola “C/D”

Request information

  Phone +39 0982 46 103
  Fax +39 +39 0982 46 103
  This email address is being protected from spambots. You need JavaScript enabled to view it.

Request a photo of the block
  Write us on Whatsapp

Typical carrara marble, everywhere all over the world. known suitable for external big jobs but not with a polish finish. the best result is given with a rough coarse finishing or at least an honed surface finishing. a mock-up, prior selection and a constant process control are recommended. cheap bad imitations are always on the market. a special care regarding the setting is warmly suggested.

Specifications

• Origin: Italy
• Block Sizes: All Dimensions
• Colour Uniformity: Good
• Availability: Good
• Prevailing Use: Interior And Exterior
• Polishing Treatment: Very Good
• Other Surface Treatment: Possible
• Compressive Strength: 1319 kg./cm.² | 1350 kg./cm.²
• Ditto After Gelivity: 1381 kg./cm.² |1392 kg./cm.²
• Water Absorption: 0,19 | 0,21
• Thermal Coeff. Expansion: 0,0098 mm./m. °C | 0,0100 mm./m. °C
• Impact Test-min. Fall Height: 98,8 cm. | 99 cm.
• Ultimate Tensil Strength: 194 kg./cm.² | 199 kg./cm.²
• Abrasion Coefficient: 2,32 mm. | 2,58 mm.
• Bulk Density: 2789 kg./cm.³ | 2795 kg./cm.³
• Elasticity Module: 757000 kg./cm.² | 757600 kg./cm.²
• Knoop Microhardness: ————— | —————
• Flexural Strength: ————— | —————
• Porosity: ————— | —————